Product Description

Ask for quotation, please send email to bebon.steel@outlook.com.

SA299 Gr.A pressure vessel plates manufacturer and exporter in China

SA299 Gr.A carbon steel is widely used for manufacturing pressure and boiler equipments. Plates of this standard under this thickness of 50 mm are normally supplied in as-rolled condition. Plates may be ordered normalized or stress relieved, or both. SA299 Gr.A Plates over 50 mm in thickness shall be normalized.

SA299 Gr.A Steel Chemical Requirements.

Grade	The Composition (by weight, heat analysis, %)
	Carbon, max.	Silicon	Manganese	Phosphous, max.	Sulfur, max.
SA299 Gr.A	0.28	0.15-0.40	0.90 -1.50	0.025	0.025

Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%

Dimensions of ASTM A299 carbon steel plates:

Thickness from 5mm to 150mm

Width: from 1,500mm to 2,500mm

Length: from 6,000mm to 12,000mm

Technical conditions

Ultrasonic tested as per SA 578 or any other as per requirement

2) MTC acc to EN 10204 3.1 / 3.2

3) Charpy Impact tested at -20 /-46 DegC.

4) Furnace Normalised

5) BQ Plates with IBR form IV<

Supplementary Test HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4.1 | S5 | S6 | S7 | S8 | S9| S11 | S12 | S14 | S17

Contact us

www.bebonchina.com

www.steel-plate-sheet.com

Emai: asteelgrade@gmail.com

bebon.steel@outlook.com

Payment Terms︰ TT/LC